Breedlove Factory Tour


Introduction to the Breedlove Custom Shop

For nearly a quarter of a century, the best instrument builders on the planet have been handcrafting the Breedlove guitars of tomorrow. Step into our workshop and experience the magic for yourself…

The Breedlove workshop is located in Bend, Oregon, surrounded by majestic snow-capped peaks and miles of untamed wilderness, creating the perfect backdrop for outdoor enthusiasts from around the world. When you enter our bustling workshop, you’re enveloped in the same warm and inviting spirit that defines Central Oregon. The high-desert setting offers endless inspiration for our gifted craftsmen who spend their days designing and building some of the world’s most distinctive guitars, mandolins, and acoustic basses. You will sound better, play better and play more on a Breedlove.

The Virtual Custom Shop Tour:

The parts department is where all the individual instrument components are made. There are three different disciplines in this area: raw wood processing, CNC processing, and bending and bracing operations.Breedlove Raw wood processing involves stacking, drying and prepping woods, and preliminary milling. In this department, we select specific wood pieces that meet Breedlove’s exacting standards for necks and bodies. We then mill the body wood to create the unique book-matched sets that comprise the tops and backs of our instruments.

CNC Processing

BreedloveThe second step is CNC processing. During this phase, we begin to shape raw wood materials into the precise dimensions required for the construction process. Mandolin and guitar necks, instrument bridges, fretboards and a number of other small pieces begin to take form here.


Bending the side woods for an instrument is probably the most difficult and interesting process that takes place in this area. The perfectly smooth, curved sides of an instrument start out flat. A skilled craftsman carefully bends stiff, thin pieces of wood into our guitar shapes by carefully applying moisture, heat, and pressure. In this initial bend, we essentially change the molecular structure of the wood itself. This gives the wood a new form and shape that it will retain forever.Breedlove


The final stage of the parts department involves bracing the top and back for unique voicing. By bracing the top, we provide the structural integrity that enhances the instrument’s tone and allows the top to withstand the tension of the string pressure.


Once an instrument’s sides are shaped and the parts have been created, it goes through a build, bind and scrape-out process to seal the end grain, closing up the instrument to give us a solid raw body. This is where all the body pieces begin to fit precisely together.

BreedloveOnce the sides are bound to the top, the body will sit, secured with tape, overnight. The following day, the tape is removed. Then we carefully scrape and sand the entire instrument to a final, raw finish. We then give the instrument a final inspection before it is allowed to move on to the next department.

Onto the Neck

BreedloveBreedloveIn the neck department, every neck is hand-filed, hand-sanded, and hand-shaped carefully and then built up to fit on a guitar body.  Once this process is complete, we inspect the neck carefully. If the neck passes our inspection, we attach it to the body for which it was built. Thus setting the geometry before the instrument is passed on to the finish department.


Finishing the Instrument

The finish process is one of the most exciting stages. This is when an instrument begins to take on a personality and come to life. During this time, we carefully apply multiple finish layers and sand down every layer after each application to eliminate any flaws. Since the thickness of the finish is measured in thousandths of an inch, true expertise and artistry is required to properly finish a Breedlove instrument. The process can vary slightly, depending on several factors. The instrument and the finish type, toner application, sunburst application or other custom finish style. The finish process strengthens the instrument by providing a highly durable finish. It also brings out the beautiful figure and depth of the amazing woods. Once we apply the final finish coat, we then buff the finish to achieve the trademark Breedlove high-gloss finish.


BreedloveWhen the instrument arrives at final assembly and string-up, we spend three days fine-tuning and adjusting every little detail. We double-check the bridge and neck to verify the geometry. To accommodate the bridge, we carefully route the finish off the body. This is to create a wood-to-wood contact and then attach the bridge to the body. We radius the fretboard, and apply the frets, nut, and saddle, as well as the tuning machines. Then we string up the instrument.  The craftsmen in this department have the privilege of hearing the first notes flow from the body of the finished instrument.

Once the final assembly is complete, the instrument then sits overnight under tension. The following day, we dial in the instrument one last time and inspect all of the appointments. Including the action, and the neck to ensure the instrument meets Breedlove’s precise specifications. Final inspection is the next stop.

Final InspectionBreedlove

By the time a guitar reaches final inspection, we’ve spent countless man-hours building and perfecting the instrument. Leaving nothing to chance, final inspection involves roughly 35 different assessments. Once we’re absolutely certain that the instrument is perfect in every way, we package the guitar and send it off to its new home. We hope to inspire self-expression and liberation through music, for generations to come.


Click Here to check out the new guitars from Winter NAMM 2018



Be the first to comment on "Breedlove Factory Tour"

Leave a comment